Key features
- Source Model CL5121GLQ6LS
Asphalt Distributor Trucks
Dongfeng CL5121GLQ6LS Asphalt Distributor Truck
For road surfacing and maintenance, the Dongfeng CL5121GLQ6LS Asphalt Distributor Truck pairs a 4.5 m spray bar (6 m option) with a 0.2–3.5 L/m² application range. The listed wheelbase is 3,800 mm. These are reference values, not a guaranteed job output. Confirm binder compatibility, calibration, completed-vehicle mass and destination requirements in the written specification.
Primary use: Controlled asphalt or bitumen application using a tank, heating, circulation and spray system defined for the project
Where this configuration fits—and where it does not.
Suitable working conditions
- Application Controlled asphalt or bitumen application using a tank, heating, circulation and spray system defined for the project
Unsuitable working conditions
- Limits Operation outside the approved load, route, stability, equipment or destination compliance limits.
Configuration options and trade-offs
- Duty Cycle Higher output or capacity targets can increase chassis, power, cooling and site-control requirements.
- Mass And Equipment Additional body, tank, crane, deck or safety equipment adds tare mass and changes axle distribution.
Compliance documents
- Required Completed-vehicle drawing, mass and axle sheet, equipment specification and destination document matrix.
Confirm material type, temperature range, spray width and rate, heating method, cleaning procedure and route controls.
Registration, emissions, dimensions, axle loads, operator requirements and equipment rules depend on destination and the final completed-vehicle specification.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 31,000–45,000
Reference price, not an FOB or CIF quotation.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define dimensional, functional, safety-system, leakage, labeling and document checks before shipment.
Confirm manuals, consumables, spare parts, service responsibilities and warranty scope for the ordered configuration.
Similar vehicles
JAC CL5043GLQ6BLS Asphalt Distributor Truck
USD 31,000–45,000
Foton CL5042TJS6ALS Asphalt Distributor Truck
USD 31,000–45,000
FAW Jiefang CL5160GLQ6LS Asphalt Distributor Truck
USD 39,000–43,000
HOWO 4×2 Asphalt Distributor Truck
USD 39,000–48,000
Dongfeng CL5040TJS6ALS 4×2 Asphalt Distributor
USD 19,000–35,000
Dongfeng D9 4×2 Asphalt Distributor Truck, 10,000–12,000 L
USD 39,000–43,000
Product questions
Which vehicle details will the quotation specify?
This page describes a reference configuration for the asphalt distributor. The written quotation will identify the selected chassis, binder distribution equipment, completed mass and axle loads, and the destination document scope.
What information is needed for a technical quotation?
Binder type; target spray rate and width; job length; ambient conditions; heating and cleaning requirements.
Are destination approvals included?
No approval is assumed. Confirm the destination document matrix, registration route and equipment requirements before contract.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Delivery Destination, quantity, drive side, emission requirement, inspection and delivery basis.
- Operating Brief Binder type; target spray rate and width; job length; ambient conditions; heating and cleaning requirements.
Checks before quotation
- Commercial Confirm inspection, warranty, spare parts, production schedule and delivery basis in writing.
- Technical Approve the chassis record, equipment drawing, completed mass and axle sheet, operating limits and document matrix.
RFQ requirements
- Required Binder type; target spray rate and width; job length; ambient conditions; heating and cleaning requirements. Also provide destination, quantity and delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Manufacturer
- Chengli special-vehicle configuration on Dongfeng chassis
- Vehicle model
- CL5121GLQ6LS
- Fuel type
- Diesel
- Emission standard
- GB17691-2018 Euro VI
- Engine model
- Ycy30165-60
- Transmission
- 8 GEARS / 6 GEARS Upon Selection
- Wheelbase
- 3800 mm
Dimensions and weight
- Gross vehicle weight (kg)
- 11990
- Curb weight (kg)
- 6950
- Maximum speed (km/h)
- 88
Asphalt spray equipment
- Application rate
- 0.2-3.5 L/sqm (Accuracy ±2%)
- Spray width
- 4.5m (Optional 6-meter Spray Bar)
- Heating system
- Thermal Oil Circulation Heating
- Pump
- 680 L/min
- Control system
- PLC (Siemens)
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.
Buying guides
Bitumen Sprayer and Asphalt Distributor Trucks: How to Choose
Compare asphalt distributor trucks by tank capacity, spray width, thermal-oil heating and control equipment for your roadwork brief.