Concrete Mixer Trucks

ZZ5317GJBV296HF1L 8×4 LNG Concrete Mixer Truck

The ZZ5317GJBV296HF1L is an 8×4 LNG concrete mixer truck with a 7.74 m³ drum, 16,900 kg rated payload and 31,000 kg GVW. Confirm concrete density, route limits and discharge requirements.

ZZ5317GJBV296HF1L 8×4 LNG Concrete Mixer Truck
Primary use: Transit mixing on planned batching-to-pour routes with controlled discharge access

Where this configuration fits—and where it does not.

Suitable working conditions

  • Operation Planned batching-to-pour routes with controlled turnaround and washout arrangements
  • Site Access and discharge areas that fit the vehicle envelope and turning needs

Unsuitable working conditions

  • Concrete Cycles outside the approved concrete time, drum duty or discharge plan
  • Loading A batch not supported by the completed mass and axle sheet

Configuration options and trade-offs

  • Drum And Payload A larger drum or heavier wear package adds tare mass and changes axle distribution
  • Route And Mix Longer routes increase concrete-control and cleaning requirements

Compliance documents

  • Required Completed-vehicle drawing, mass and axle sheet, mixer specification, functional test plan and destination document matrix
Drum volume does not by itself approve the working batch. Confirm concrete density, completed tare mass, axle loads, route time, mixing duty and discharge conditions.

Vehicle gallery

Vehicle photos and details.

Commercial confirmation

Price and delivery

Price, delivery and shipping

Reference priceUSD 10,000–28,000

Reference price, not an FOB or CIF quotation.

Supplier, inspection and support

Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.

Define drum rotation, charge/discharge rate, controls, water system, leakage, dimensions and document checks before shipment.

Confirm drum wear parts, rollers, hydraulic or drive components, controls, chassis parts and warranty responsibilities.

Product questions

Can the full nominal drum volume always be carried?

No. Confirm concrete density, completed tare mass and axle loads before setting the working batch.

What route data is required?

Provide loaded distance, gradients, traffic, cycle time, ambient conditions and discharge access.

Which mixer parts should be included in the inspection?

Define drum rotation, controls, charge/discharge rate, water system, leakage and documentation checks.

Project inquiry

Request a model-specific review.

Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.

Buyer inputs required

  • Concrete Batch volume, density, slump, mixing and discharge procedure
  • Delivery Destination, quantity, drive side and emission requirement
  • Route Loaded distance, gradients, traffic, cycle time and site access

Checks before quotation

  • Commercial Confirm inspection, wear parts, warranty, schedule and delivery basis
  • Technical Approve chassis, drum geometry, drive system, water system, completed mass and axle loads

RFQ requirements

  • Required Destination; quantity; batch and concrete density; route cycle; discharge needs; drive side; compliance and delivery terms.
Chat on WhatsApp

Project inquiry

Product Specifications View full specificationsHide specifications

Chassis and power

Vehicle model
ZZ5317GJBV296HF1L
Drive layout
8×4
Fuel type
LNG
Engine power (kW)
385
Wheelbase
1,950 + 2,900 + 1,350 mm

Dimensions and weight

Gross vehicle weight (kg)
31000
Overall length (mm)
10590
Overall width (mm)
2550
Overall height (mm)
3990
Maximum speed (km/h)
82

Concrete mixing equipment

Drum volume
7.74 m³
Mixing speed
2–14 r/min
Discharge rate
At least 1.8 m³/min
Drum angle
13°

Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.

WhatsApp