Key features
- Configuration Summary Dongfeng 8×4 tipper; YCK08350-60 engine; 31,000 kg gross vehicle weight and 19,720 kg rated payload.
Dump Trucks
CL3310ZX6ZT 8×4 Dump Truck
A four-axle tipper with a 22.785 m³ body reference for high-volume construction and mine-support haulage.
Primary use: Bulk material haulage for construction, earthworks or quarry operations
Key specifications
- Drive layout
- 8×4
- Engine information
- YCK08350-60
- Capacity / payload
- 22.785 m³ body reference; working load depends on material density and axle limits
- Gross vehicle weight (kg)
- 31000 kg
- Body dimensions
- 6,200 × 2,400 × 1,500 mm
Where this configuration fits—and where it does not.
Suitable working conditions
- Materials Earth, aggregate and similar bulk material within the approved density and body limits
- Site Firm loading and tipping areas with adequate manoeuvring and overhead clearance
Unsuitable working conditions
- Loading Any load not supported by the completed mass and axle sheet
- Tipping Soft, sloping or unstable ground, overhead hazards or uncontrolled exclusion zones
Configuration options and trade-offs
- Body Volume A larger body raises volume but may reduce the density or load that can be carried legally
- Wear Package Heavier floor and side protection improve durability but add tare mass
Compliance documents
- Required Completed-vehicle drawing, mass and axle sheet, body/hydraulic specification and destination document matrix
Set the working load from material density, completed tare mass and axle limits. Tip only on firm, level ground with the exclusion zone and overhead clearance controlled.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 21,000–35,000
Reference price, not an FOB or CIF quotation.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define dimension, body weld, hydraulic leakage, tipping-cycle, tailgate, lighting and document checks before shipment.
Confirm hydraulic seals and filters, cylinder support, body wear parts, chassis parts and warranty responsibilities.
Similar vehicles
CL3180ZX6AZT 4×2 Dump Truck
USD 31,000–35,000
CL3180ZX6BZT 4×2 Dump Truck
USD 15,000-25,000
Shacman 6×4 Construction Dump Truck
USD 8,000–12,900
Sinotruk HOWO TX 8×4 Dump Truck
USD 25,800–41,200
CL3255BDFA6B 6×4 Dump Truck
USD 15,000–25,000
CL5120TZL6 4×2 Dump Truck
USD 20,000–25,000
Product questions
What engine and drive layout does the CL3310ZX6ZT use?
The data lists a YCK08350-60 engine with an 8×4 drive layout.
What body dimensions are listed?
The dump body data lists 6,200 × 2,400 × 1,500 mm. Body geometry and the published volume label should be compared separately from payload.
What are the listed mass values?
The configuration lists 31,000 kg gross vehicle weight, 11,710 kg curb weight and 19,720 kg payload. The completed configuration and axle limits determine the operating load.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Delivery Destination, quantity, drive side and emission requirement
- Material Material type, bulk density, target tonnes per trip and loading equipment
- Route Road class, gradients, surface, turning space and tipping area
Checks before quotation
- Commercial Confirm inspection, documentation, warranty, spare parts, schedule and delivery basis
- Technical Approve chassis, body drawing, hydraulic system, completed tare mass, axle loads and tipping stability
RFQ requirements
- Required Destination; quantity; material and density; target trip load; route and gradients; loading/tipping conditions; compliance and delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Manufacturer
- Chengli configured vehicle
- Vehicle model
- CL3310ZX6ZT
- Drive layout
- 8×4
- Fuel type
- Diesel
- Engine model
- YCK08350-60
- Transmission
- FAST 12-speed manual
- Wheelbase
- 1,995 + 4,500 + 1,350 mm
Dimensions and weight
- Gross vehicle weight (kg)
- 31000
- Curb weight (kg)
- 11710
- Overall length (mm)
- 9350
- Overall width (mm)
- 2550
- Overall height (mm)
- 3450
- Maximum speed (km/h)
- 90
Dump body and tipping equipment
- Body dimensions
- 6,200 × 2,400 × 1,500 mm
- Tipping mechanism
- Front-mounted tipping cylinder
- Unloading arrangement
- Rear or side arrangement subject to approved drawing
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.
Buying guides
Tipper Truck Body Size: Matching Cubic Metres to Your Material
Compare real tipper body dimensions, material-density references and a worked mass budget to see when space or cargo mass limits the load.
Tipper Truck Price: What Determines the Cost
Compare tipper quotations by chassis, body, tipping equipment and delivery scope. Build a price brief around the actual haulage job.