Key features
- Configuration Summary Foton GTL 8×4 tipper; Cummins ISG400 engine; front-mounted tipping cylinder and two body-length options.
- Source Model FOTON GTL
Dump Trucks
Foton GTL 8×4 Dump Truck
The Foton GTL 8×4 offers an alternative chassis starting point for a four-axle tipper project. Define the body around material density, loading equipment and the unloading area rather than selecting by volume alone.
Primary use: Construction material transport
Key specifications
- Drive layout
- 8×4
- Engine information
- Cummins ISG 400
- Gross vehicle weight (kg)
- 50000 kg
- Body dimensions
- 6500/6700×2300×1500 mm
Where this configuration fits—and where it does not.
Suitable working conditions
- Application Bulk material haulage on a defined construction, quarry or site route
Unsuitable working conditions
- Limits Operation outside the approved load, route, stability, equipment or destination compliance limits.
Configuration options and trade-offs
- Duty Cycle Higher output or capacity targets can increase chassis, power, cooling and site-control requirements.
- Mass And Equipment Additional body, tank, crane, deck or safety equipment adds tare mass and changes axle distribution.
Compliance documents
- Required Completed-vehicle drawing, mass and axle sheet, equipment specification and destination document matrix.
Confirm material density, completed mass, axle loads and tipping-ground stability before setting the working load.
Registration, emissions, dimensions, axle loads, operator requirements and equipment rules depend on destination and the final completed-vehicle specification.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 42,000-44,000
Reference price, not an FOB or CIF quotation.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define dimensional, functional, safety-system, leakage, labeling and document checks before shipment.
Confirm manuals, consumables, spare parts, service responsibilities and warranty scope for the ordered configuration.
Similar vehicles
CL5120TZL6 4×2 Dump Truck
USD 20,000–25,000
Chengli CLW5100ZWX6 4×2 Dump Truck
USD 10,800–58,000
CL3182ZX6ZT 4×2 Dump Truck
USD 15,000–22,000
CL3255BDFA6B 6×4 Dump Truck
USD 15,000–25,000
Shacman 6×4 Construction Dump Truck
USD 8,000–12,900
Sinotruk HOWO TX 8×4 Dump Truck
USD 25,800–41,200
Product questions
Which engine is listed for the Foton GTL configuration?
The configuration lists a Cummins ISG 400 engine and an 8×4 drive layout.
Which dump body dimensions can be compared?
The data lists 6,500 or 6,700 × 2,300 × 1,500 mm body dimensions. Agree the selected body length, steel and wear package for the job.
How is the body tipped?
The configuration lists front lifting. The body, hydraulic equipment and chassis must be specified together.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Delivery Destination, quantity, drive side, emission requirement, inspection and delivery basis.
- Operating Brief Material and bulk density; tonnes per trip; loading method; route, gradients and tipping area.
Checks before quotation
- Commercial Confirm inspection, warranty, spare parts, production schedule and delivery basis in writing.
- Technical Approve the chassis record, equipment drawing, completed mass and axle sheet, operating limits and document matrix.
RFQ requirements
- Required Material and bulk density; tonnes per trip; loading method; route, gradients and tipping area. Also provide destination, quantity and delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Manufacturer
- Chengli special-vehicle configuration on Foton chassis
- Vehicle model
- FOTON GTL
- Drive layout
- 8×4
- Drive side
- Left-hand drive (LHD) as standard; right-hand drive available on request for export
- Fuel type
- Diesel
- Emission standard
- Euro 2/3/4/5/6
- Engine model
- Cummins ISG 400
- Transmission
- FAST 12 GEARS
- Wheelbase
- 1800 + 3300 + 1400 mm
Dimensions and weight
- Gross vehicle weight (kg)
- 50000
- Maximum speed (km/h)
- 82
Dump body and tipping equipment
- Body dimensions
- 6500/6700×2300×1500 mm
- Tipping mechanism
- Front Lifting Style
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.
Buying guides
Tipper Truck Body Size: Matching Cubic Metres to Your Material
Compare real tipper body dimensions, material-density references and a worked mass budget to see when space or cargo mass limits the load.
Tipper Truck Price: What Determines the Cost
Compare tipper quotations by chassis, body, tipping equipment and delivery scope. Build a price brief around the actual haulage job.