Key features
- The referenced engine is WP10H400E62, rated 294 kW (400 hp).
- The source vehicle uses four axles with an 8×4 drive layout.
Equipment Transport Trucks
8×4 400 hp Equipment Transport Truck
This 8×4 equipment transport truck uses a 294 kW (400 hp) WP10H400E62 diesel engine for moving machinery between work locations. The referenced configuration is 12.0 m long overall. Machine weight, track width, loading angle, deck dimensions, axle distribution and route restrictions should be checked together before the final chassis and body are specified.
Primary use: Machinery transport on planned site and road routes.
Moving wheeled or tracked worksite equipment after machine dimensions, loading method and route limits are reviewed.
Where this configuration fits—and where it does not.
Check loaded machine mass, deck and ramp geometry, tie-down plan, completed axle loads and route limits before quoting a transport configuration.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 45,000–65,000
Reference price, not an FOB or CIF quotation.
Similar vehicles
CLW 8×4 330 hp Equipment Transport Truck
USD 60,000–80,000
FAW 8×4 Excavator Transport Flatbed
USD 48,000–53,500
FAW 62 BC6 4×2 Machinery Transport Truck
USD 28,000–48,000
Chengli CL5312TPB6TX 8×4 Equipment Transport Truck
USD 15,800–20,000
Chengli CL5310TPBA6 8×4 Equipment Transport Truck
USD 15,800–20,000
CLW9387TDP Gooseneck Lowbed Semi-Trailer
Product questions
Can the transport capacity be chosen from engine power alone?
No. The machine's operating mass, deck and ramp arrangement, completed-vehicle mass and axle limits determine the usable transport configuration.
What measurements are needed for a machinery transport quote?
Send the machine's mass, overall length, width and height, track or wheel dimensions, loading method, route and destination country.
Is the loading ramp specification fixed?
The ramp and deck must be matched to the equipment and approved body drawing. Confirm ramp angle, width, loading capacity and ground clearance for the final build.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Operating Brief Provide machine make and model, operating mass, track or wheel width, overall dimensions, loading method, route, destination country and required steering side.
Checks before quotation
-
- Machine operating mass and dimensions
- Deck and ramp drawings
- Completed-vehicle weight and axle distribution
- Securement points and route/permit limits
Product Specifications View full specificationsHide specifications
Chassis and power
- Drive layout
- 8×4
- Fuel type
- Diesel
- Engine model
- WP10H400E62
- Engine power (kW)
- 294
Dimensions and weight
- Overall length (mm)
- 12000
- Overall width (mm)
- 2550
- Overall height (mm)
- 3950
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.