Key features
- Source Model CL5180
Equipment Transport Trucks
Chengli CL5180 Flatbed Wrecker Truck
Chengli CL5180 Flatbed Wrecker Truck is a starting configuration for vehicle recovery and transport. Check winch and ramp arrangement against the vehicles to be recovered. Specify recovered vehicle mass, deck length, loading angle and securing points, then review the completed vehicle mass, axle loads and destination requirements in the project quotation.
Primary use: Transport of machinery or vehicles using a deck and loading system matched to the actual equipment
Where this configuration fits—and where it does not.
Suitable working conditions
- Application Transport of machinery or vehicles using a deck and loading system matched to the actual equipment
Unsuitable working conditions
- Limits Operation outside the approved load, route, stability, equipment or destination compliance limits.
Configuration options and trade-offs
- Duty Cycle Higher output or capacity targets can increase chassis, power, cooling and site-control requirements.
- Mass And Equipment Additional body, tank, crane, deck or safety equipment adds tare mass and changes axle distribution.
Compliance documents
- Required Completed-vehicle drawing, mass and axle sheet, equipment specification and destination document matrix.
Confirm machine mass, axle distribution, dimensions, ramp angle, tie-down points and route limits before loading.
Registration, emissions, dimensions, axle loads, operator requirements and equipment rules depend on destination and the final completed-vehicle specification.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 69,000–78,000
Reference price, not an FOB or CIF quotation.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define dimensional, functional, safety-system, leakage, labeling and document checks before shipment.
Confirm manuals, consumables, spare parts, service responsibilities and warranty scope for the ordered configuration.
Similar vehicles
Chengli CLW5032 Flatbed Wrecker Truck
USD 40,000–50,000
Chengli CL5040 Flatbed Wrecker Truck
USD 22,000–28,000
Chengli CL5310TPBA6 8×4 Equipment Transport Truck
USD 15,800–20,000
Chengli CL5312TPB6TX 8×4 Equipment Transport Truck
USD 15,800–20,000
Dongfeng 8×4 31 t Excavator Carrier
USD 48,000–53,500
25 t Machinery Transport Flatbed Truck
USD 20,000–25,000
Product questions
Which vehicle details will the quotation specify?
This page describes a reference configuration for the flatbed recovery truck. The written quotation will identify the selected chassis, deck, winch and loading equipment, completed mass and axle loads, and the destination document scope.
What information is needed for a technical quotation?
Machine model; operating mass; dimensions; axle or track spacing; ground clearance; route and loading method.
Are destination approvals included?
No approval is assumed. Confirm the destination document matrix, registration route and equipment requirements before contract.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Delivery Destination, quantity, drive side, emission requirement, inspection and delivery basis.
- Operating Brief Machine model; operating mass; dimensions; axle or track spacing; ground clearance; route and loading method.
Checks before quotation
- Commercial Confirm inspection, warranty, spare parts, production schedule and delivery basis in writing.
- Technical Approve the chassis record, equipment drawing, completed mass and axle sheet, operating limits and document matrix.
RFQ requirements
- Required Machine model; operating mass; dimensions; axle or track spacing; ground clearance; route and loading method. Also provide destination, quantity and delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Manufacturer
- Chengli special-vehicle configuration
- Vehicle model
- CL5180
- Fuel type
- Pure Electric
- Emission standard
- Zero-Emission Pure Electric
- Transmission
- Electric Drive
- Wheelbase
- 5800 mm
Dimensions and weight
- Gross vehicle weight (kg)
- 18000
- Curb weight (kg)
- 13800
Equipment transport deck
- Deck length
- 7300+1000 mm
- Deck material
- 6mm thick patterned steel plate
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.