Key features
- Source Model CL5312TPB6TX
Equipment Transport Trucks
Chengli CL5312TPB6TX 8×4 Equipment Transport Truck
Chengli CL5312TPB6TX 8×4 Equipment Transport Truck is a starting configuration for machinery transport. Select the deck and loading system for the actual machine dimensions and route. Specify equipment weight, deck length, ramp angle and tie-down points, then review the completed vehicle mass, axle loads and destination requirements in the project quotation.
Primary use: Transport of machinery or vehicles using a deck and loading system matched to the actual equipment
Where this configuration fits—and where it does not.
Suitable working conditions
- Application Transport of machinery or vehicles using a deck and loading system matched to the actual equipment
Unsuitable working conditions
- Limits Operation outside the approved load, route, stability, equipment or destination compliance limits.
Configuration options and trade-offs
- Duty Cycle Higher output or capacity targets can increase chassis, power, cooling and site-control requirements.
- Mass And Equipment Additional body, tank, crane, deck or safety equipment adds tare mass and changes axle distribution.
Compliance documents
- Required Completed-vehicle drawing, mass and axle sheet, equipment specification and destination document matrix.
Confirm machine mass, axle distribution, dimensions, ramp angle, tie-down points and route limits before loading.
Registration, emissions, dimensions, axle loads, operator requirements and equipment rules depend on destination and the final completed-vehicle specification.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 15,800–20,000
Reference price, not an FOB or CIF quotation.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define dimensional, functional, safety-system, leakage, labeling and document checks before shipment.
Confirm manuals, consumables, spare parts, service responsibilities and warranty scope for the ordered configuration.
Similar vehicles
FAW 62 BC6 4×2 Machinery Transport Truck
USD 28,000–48,000
Chengli CL5310TPBA6 8×4 Equipment Transport Truck
USD 15,800–20,000
Chengli CLW5032 Flatbed Wrecker Truck
USD 40,000–50,000
FAW 8×4 Excavator Transport Flatbed
USD 48,000–53,500
CLW 8×4 330 hp Equipment Transport Truck
USD 60,000–80,000
CLW9387TDP Gooseneck Lowbed Semi-Trailer
Product questions
Which vehicle details will the quotation specify?
This page describes a reference configuration for the equipment transport truck. The written quotation will identify the selected chassis, deck and ramps, completed mass and axle loads, and the destination document scope.
What information is needed for a technical quotation?
Machine model; operating mass; dimensions; axle or track spacing; ground clearance; route and loading method.
Are destination approvals included?
No approval is assumed. Confirm the destination document matrix, registration route and equipment requirements before contract.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Delivery Destination, quantity, drive side, emission requirement, inspection and delivery basis.
- Operating Brief Machine model; operating mass; dimensions; axle or track spacing; ground clearance; route and loading method.
Checks before quotation
- Commercial Confirm inspection, warranty, spare parts, production schedule and delivery basis in writing.
- Technical Approve the chassis record, equipment drawing, completed mass and axle sheet, operating limits and document matrix.
RFQ requirements
- Required Machine model; operating mass; dimensions; axle or track spacing; ground clearance; route and loading method. Also provide destination, quantity and delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Manufacturer
- Chengli special-vehicle configuration
- Vehicle model
- CL5312TPB6TX
- Drive layout
- 8×4
- Fuel type
- Diesel
- Emission standard
- Euro2/3/4/5/6
- Transmission
- Manual
- Wheelbase
- 1850+5800+1350 mm
Dimensions and weight
- Maximum speed (km/h)
- 89
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.