Suitable working conditions
- Machines Tracked or wheeled machinery within the approved deck, ramp, mass and securement limits
- Site Firm, level loading area with sufficient approach and manoeuvring space
Equipment Transport Trucks
FAW 16 t Machinery Transport Flatbed Truck
A two-axle FAW machinery carrier with a 9,460 kg rated-load reference and rear ramps for compact construction equipment.
Primary use: Transport of excavators, loaders and other machinery using a flat deck and rear ramp system
Where this configuration fits—and where it does not.
Unsuitable working conditions
- Route Routes not checked for axle, height, width, length and turning constraints
Configuration options and trade-offs
- Deck And Ramp Lower approach angles can add ramp length or mechanism mass
- Equipment Winches, toolboxes and heavier ramps add tare mass and can reduce usable machine allowance
Compliance documents
- Required Completed-vehicle drawing, deck/ramp specification, mass and axle sheet, securement plan and destination document matrix
Rated load does not approve every machine.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 15,800–20,000
Reference price, not an FOB or CIF quotation.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define dimensions, deck and ramp function, hydraulic leakage where fitted, tie-down identification, lighting and document checks before shipment.
Confirm ramp hinges and hydraulics, deck wear items, tie-down parts, winch support, chassis parts and warranty responsibilities.
Similar vehicles
Dongfeng 8×4 31 t Excavator Carrier
USD 48,000–53,500
25 t Machinery Transport Flatbed Truck
USD 20,000–25,000
Chengli CL5040 Flatbed Wrecker Truck
USD 22,000–28,000
Chengli CL5180 Flatbed Wrecker Truck
USD 69,000–78,000
Chengli CLW5032 Flatbed Wrecker Truck
USD 40,000–50,000
CLH5180 Mobile Workshop & Waste-Oil Service Truck
USD 73,000–85,000
Product questions
Does the rated load mean every machine below that mass will fit?
No. Check centre of gravity, contact loads, ramp geometry, securement and completed axle distribution.
Are hydraulic ramps included?
Ramp type is configuration-specific and must be defined in the approved drawing and quotation.
What machine details are required?
Provide make/model, operating mass, dimensions, contact area, ground clearance, centre of gravity and loading method.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Loading Self-propelled or winch loading, approach length and site surface
- Machine Make/model, operating mass, dimensions, track or tyre contact, ground clearance and centre of gravity
- Route Destination, road limits, permits and delivery frequency
Checks before quotation
- Commercial Confirm inspection, documentation, warranty, spare parts, schedule and delivery basis
- Technical Approve chassis, deck drawing, ramp geometry, deck strength, tie-downs, winch if required and completed axle loads
RFQ requirements
- Required Destination; quantity; machine make/model, mass and dimensions; loading method; route limits; ramp and winch needs; delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Manufacturer
- FAW / Chengli configuration
- Vehicle model
- FAW 16 t Flatbed Truck
- Chassis brand
- FAW
- Drive layout
- 4×2
- Fuel type
- Diesel
- Engine power (kW)
- 142
- Transmission
- 8-speed manual
- Wheelbase
- 4,900 mm
Dimensions and weight
- Gross vehicle weight (kg)
- 16000
- Overall length (mm)
- 8600
- Overall width (mm)
- 2500
- Overall height (mm)
- 2900
- Maximum speed (km/h)
- 89
Equipment transport deck
- Deck material
- High-strength patterned steel plate
- Loading ramps
- Rear ladder ramps shown; hydraulic arrangement to be specified
- Load securement
- Tie-down positions and ratings to match target machines
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.