Key features
- Source Model 22 BWG
Fuel Tanker & Worksite Refuelling Trucks
FAW 22 BWG 4×2 Fuel Tank Truck
FAW 22 BWG 4×2 Fuel Tank Truck is a starting configuration for controlled site fuel delivery. Set the tank and dispensing package against local transport and site requirements. Specify fuel type, compartment plan, dispensing equipment and safety controls, then review the completed vehicle mass, axle loads and destination requirements in the project quotation.
Primary use: Fuel transport or mobile refueling with a destination-specific tank and safety package
Where this configuration fits—and where it does not.
Suitable working conditions
- Application Fuel transport or mobile refueling with a destination-specific tank and safety package
Unsuitable working conditions
- Limits Operation outside the approved load, route, stability, equipment or destination compliance limits.
Configuration options and trade-offs
- Duty Cycle Higher output or capacity targets can increase chassis, power, cooling and site-control requirements.
- Mass And Equipment Additional body, tank, crane, deck or safety equipment adds tare mass and changes axle distribution.
Compliance documents
- Required Completed-vehicle drawing, mass and axle sheet, equipment specification and destination document matrix.
Fuel compatibility, compartment design, hazardous-goods rules, dispensing equipment and operator procedures require destination approval.
Registration, emissions, dimensions, axle loads, operator requirements and equipment rules depend on destination and the final completed-vehicle specification.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 40,000–80,000
Reference price, not an FOB or CIF quotation.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define dimensional, functional, safety-system, leakage, labeling and document checks before shipment.
Confirm manuals, consumables, spare parts, service responsibilities and warranty scope for the ordered configuration.
Similar vehicles
FAW 80 C6 4×2 Fuel Tank Truck
USD 30,000–65,000
FAW 81 C6 4×2 Fuel Tank Truck
USD 40,000–68,000
Foton 320 B6 8×4 Fuel Tank Truck
USD 50,000–90,000
Chengli CL5040 4×2 Fuel Tank Truck
USD 27,000–31,000
FAW Jiefang CL5323 8×4 Fuel Tank Truck
USD 67,000–75,000
FAW CL5121 4×2 Fuel Tank Truck
Product questions
Which vehicle details will the quotation specify?
This page describes a reference configuration for the fuel tanker. The written quotation will identify the selected chassis, tank and dispensing equipment, completed mass and axle loads, and the destination document scope.
What information is needed for a technical quotation?
Fuel type; usable volume; compartments; pump and dispenser duty; destination hazardous-goods requirements.
Are destination approvals included?
No approval is assumed. Confirm the destination document matrix, registration route and equipment requirements before contract.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Delivery Destination, quantity, drive side, emission requirement, inspection and delivery basis.
- Operating Brief Fuel type; usable volume; compartments; pump and dispenser duty; destination hazardous-goods requirements.
Checks before quotation
- Commercial Confirm inspection, warranty, spare parts, production schedule and delivery basis in writing.
- Technical Approve the chassis record, equipment drawing, completed mass and axle sheet, operating limits and document matrix.
RFQ requirements
- Required Fuel type; usable volume; compartments; pump and dispenser duty; destination hazardous-goods requirements. Also provide destination, quantity and delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Manufacturer
- Chengli special-vehicle configuration on FAW chassis
- Vehicle model
- 22 BWG
- Drive layout
- 4×2
- Fuel type
- Diesel
- Emission standard
- Euro 2/3/4/5/6
- Transmission
- Manual
Fuel tank and transfer equipment
- Nominal tank volume
- ＜5000L
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.
Buying guides
Fuel Tanker Trucks: Tank Sizes from 5 to 30 m³ Compared
Compare 5 to 30 m³ fuel tanker configurations by nominal capacity, delivery equipment, loading arrangement and route access.