Suitable working conditions
- Service Planned field maintenance with defined tools, fluids, power and waste handling
- Site Firm parking area with ventilation, lighting and controlled work zones
Mobile Workshop Trucks
CLH5180 Mobile Workshop & Waste-Oil Service Truck
An 18 t-class mobile workshop configuration for mine, wind-farm and construction-equipment service, with waste-oil collection and field-repair systems.
Primary use: On-site maintenance and repair support for mines, wind farms, factories and construction equipment
Where this configuration fits—and where it does not.
Unsuitable working conditions
- Layout Unapproved tool or fluid additions that change mass, ventilation or electrical loading
- Operation Hot work, lifting or waste-fluid handling without site controls
Configuration options and trade-offs
- Equipment And Payload More tools, tanks and power equipment add tare mass and reduce spare capacity
- Workspace And Access More enclosed storage can reduce internal working clearance and ventilation
Compliance documents
- Required Completed layout, equipment list, mass and axle sheet, electrical/fluid diagrams, safety assessment and destination document matrix
Define the service tasks and tool inventory before layout approval. Check equipment mass, electrical load, ventilation, lifting points, fluid segregation and remaining axle capacity as one completed vehicle.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 73,000–85,000
Reference price, not an FOB or CIF quotation.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define power, lighting, ventilation, fluid transfer, filtration, welding/cutting, lifting, storage and document checks before shipment.
Confirm pumps, filters, hoses, electrical equipment, welding/cutting consumables, tools, chassis parts and warranty responsibilities.
Similar vehicles
Dongfeng 4×2 10.63 m³ Water Sprinkler Truck
USD 20,000–70,000
FAW Jiefang 4×2 6.88 m³ Water Sprinkler Truck
HOWO TX 6×4 18–21 m³ Fuel Supply Truck
USD 57,000–61,000
Dongfeng 8×4 31 t Excavator Carrier
USD 48,000–53,500
FAW 16 t Machinery Transport Flatbed Truck
USD 15,800–20,000
Dongfeng CL5041GJY6BWN 2,630 L Fuel Supply Truck
Product questions
Is the workshop equipment list fixed?
No. Define the required service tasks and tools, then approve the layout, mass, power and safety systems.
Can waste oil be collected?
Yes when the ordered system includes compatible tanks, pumps, filtration, labelling and controlled transfer procedures.
What information is required?
Provide target machines, common repairs, tool list, fluids, lifting needs, electrical loads and operating environment.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Fluids New and waste oil types, volumes, pumps, filtration and segregation
- Power Generator, shore supply, compressed air and electrical loads
- Tasks Target machines, service procedures, tools, lifting and welding needs
Checks before quotation
- Commercial Confirm inspection, manuals, warranty, consumables, schedule and delivery basis
- Technical Approve equipment layout, weights, axle loads, electrical single-line, ventilation, fluid circuit and lifting points
RFQ requirements
- Required Destination; quantity; target machines; service tasks; tool and fluid inventory; power and air needs; compliance and delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Manufacturer
- Chengli configured vehicle
- Vehicle model
- CLH5180
- Drive layout
- 4×2
- Engine power (kW)
- 177
- Wheelbase
- 4,500 or 5,550 mm; confirm final chassis
Mobile workshop equipment
- Fluid service
- Waste-oil collection, hydraulic/engine/gear-oil filling, grease filling, urea filling and lubrication flushing
- Repair systems
- Gas-shielded welding, plasma cutting, pipe crimping, tyre repair and emergency starting
- Support systems
- Emergency power, heavy-item lifting and oil-water separation/filtration
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.