Key features
- Source Model CLW5185JSQ6SZ
Truck-mounted Cranes
Chengli CLW5185JSQ6SZ 4×2 Truck-Mounted Crane
Chengli CLW5185JSQ6SZ 4×2 Truck-Mounted Crane is a starting configuration for material transport with on-site lifting. Match the crane and chassis to the actual lift plan rather than a headline capacity. Specify load chart at working radius, outrigger area and remaining payload, then review the completed vehicle mass, axle loads and destination requirements in the project quotation.
Primary use: Combined material transport and lifting within an approved crane load chart and site plan
Where this configuration fits—and where it does not.
Suitable working conditions
- Application Combined material transport and lifting within an approved crane load chart and site plan
Unsuitable working conditions
- Limits Operation outside the approved load, route, stability, equipment or destination compliance limits.
Configuration options and trade-offs
- Duty Cycle Higher output or capacity targets can increase chassis, power, cooling and site-control requirements.
- Mass And Equipment Additional body, tank, crane, deck or safety equipment adds tare mass and changes axle distribution.
Compliance documents
- Required Completed-vehicle drawing, mass and axle sheet, equipment specification and destination document matrix.
Never select by maximum lift alone. Confirm radius, boom position, outrigger reactions, chassis stability and ground bearing capacity.
Registration, emissions, dimensions, axle loads, operator requirements and equipment rules depend on destination and the final completed-vehicle specification.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Reference priceUSD 12,500–48,800
Reference price, not an FOB or CIF quotation.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define dimensional, functional, safety-system, leakage, labeling and document checks before shipment.
Confirm manuals, consumables, spare parts, service responsibilities and warranty scope for the ordered configuration.
Similar vehicles
Chengli CLW5250 6×4 Truck-Mounted Crane
USD 39,000–45,000
Chengli CLW5110JGKD6CS1 Truck-Mounted Crane
USD 19,000–38,000
Chengli CL5311JSQ6FD Truck-Mounted Crane
USD 19,000–38,000
4×4 6.3 t Truck-Mounted Crane
CLW5250JSQASZ Truck-Mounted Knuckle-Boom Crane
USD 12,000–22,900
JMC Double-Cab 2.8 t Crane Truck
USD 25,000–30,000
Product questions
Which vehicle details will the quotation specify?
This page describes a reference configuration for the truck-mounted crane. The written quotation will identify the selected chassis, crane package and stabilisation arrangement, completed mass and axle loads, and the destination document scope.
What information is needed for a technical quotation?
Load mass and dimensions; working radius and height; lift path; ground conditions; cargo-deck requirement.
Are destination approvals included?
No approval is assumed. Confirm the destination document matrix, registration route and equipment requirements before contract.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Delivery Destination, quantity, drive side, emission requirement, inspection and delivery basis.
- Operating Brief Load mass and dimensions; working radius and height; lift path; ground conditions; cargo-deck requirement.
Checks before quotation
- Commercial Confirm inspection, warranty, spare parts, production schedule and delivery basis in writing.
- Technical Approve the chassis record, equipment drawing, completed mass and axle sheet, operating limits and document matrix.
RFQ requirements
- Required Load mass and dimensions; working radius and height; lift path; ground conditions; cargo-deck requirement. Also provide destination, quantity and delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Manufacturer
- Chengli special-vehicle configuration
- Vehicle model
- CLW5185JSQ6SZ
- Drive layout
- 4×2
- Fuel type
- Diesel
- Emission standard
- Euro 2/3/4/5/6
- Transmission
- Manual
- Wheelbase
- 6000 mm
Dimensions and weight
- Maximum speed (km/h)
- 89
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.
Buying guides
Truck-Mounted Crane Guide: Lifting Capacity, Boom Type and Chassis
Compare straight and folding crane booms, rated lift and chassis options. Select a crane truck around the actual load, radius, setup and transport task.