Truck-mounted Cranes
A FAW 6×2 crane truck using an SQS250-4 four-section straight boom. The 10 t value is the maximum rated lift at short radius; every lift remains governed by the approved load chart, outrigger setup and ground conditions.
Vehicle gallery
Commercial confirmation
Reference price, not an FOB or CIF quotation.
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define crane functions, limit devices, overload protection, outriggers, hydraulic leakage, dimensions and document checks before shipment.
Confirm crane service intervals, hydraulic filters and seals, load-chart control, chassis parts and warranty responsibilities.
USD 19,000–38,000
USD 19,000–38,000
USD 19,000–38,000
USD 19,000–38,000
USD 19,000–28,000
USD 19,000–38,000
No. The load data shows 10,000 kg at a short 2.5 m radius and much lower capacity at long radius. Use the approved chart for each lift.
Use the completed tare mass and axle sheet after the crane, subframe, outriggers and body are installed.
Provide the heaviest load, lift radius and height, ground-bearing conditions, setup space, overhead hazards and cargo requirement.
Project inquiry
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.
Compare straight and folding crane booms, rated lift and chassis options. Select a crane truck around the actual load, radius, setup and transport task.