Truck-mounted Cranes

HOWO 8×4 SQS350-5 14 t Crane Truck

This SQS350-5 configuration lists a 14,000 kg maximum rating at a 2.5 m radius, a 19.9 m maximum radius and a 21.3 m maximum height. These maxima are not simultaneous lifting conditions; select the task against the crane load chart.

HOWO 8×4 SQS350-5 14 t Crane Truck
Primary use: Site lifting and material delivery

Key specifications

Drive layout
8×4
Engine information
MC11.40-60
Capacity / payload
14,000 kg maximum rated lift at 2.5 m; capacity falls with radius
Gross vehicle weight (kg)
31000 kg

Where this configuration fits—and where it does not.

Key features

  • Configuration Summary HOWO 8×4 crane truck; MC11.40-60 engine rated at 297 kW; SQS350-5 crane with a 14 t maximum lifting rating.

Suitable working conditions

  • Lifting Planned lifts on firm, level support within the approved chart
  • Transport Materials secured within the remaining legal cargo allowance

Unsuitable working conditions

  • Transport Cargo set without the completed mass and axle sheet

Configuration options and trade-offs

  • Cargo And Crane A heavier crane or body reduces remaining cargo allowance
  • Reach And Capacity Capacity falls as working radius and boom extension increase

Compliance documents

  • Required Crane load chart, general arrangement, stability/outrigger data, completed mass and axle sheet and destination document matrix
Maximum rated lift is available only at specified short-radius conditions.

Vehicle gallery

Vehicle photos and details.

Commercial confirmation

Price and delivery

Price, delivery and shipping

Reference priceUSD 19,000–28,000

Reference price, not an FOB or CIF quotation.

Supplier, inspection and support

Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.

Define crane functions, limit devices, overload protection, outriggers, hydraulic leakage, dimensions and document checks before shipment.

Confirm crane service intervals, hydraulic filters and seals, load-chart control, chassis parts and warranty responsibilities.

Product questions

Which crane system is fitted to this HOWO configuration?

The equipment data lists an SQS350-5 five-section straight boom on an 8×4 chassis.

What lifting geometry is listed?

The data lists a 21.3 m maximum height, 19.9 m maximum radius and 350 kN·m maximum lifting moment. Use the crane load chart for the actual lift radius and setup.

What engine and cargo payload are listed?

The configuration lists an MC11.40-60 engine rated at 297 kW and 9,505 kg payload. Review cargo loading with the installed crane and axle distribution.

Project inquiry

Request a model-specific review.

Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.

Buyer inputs required

  • Lift Maximum load, dimensions, radius, height and lift frequency
  • Site Ground bearing, gradients, access, overhead hazards and setup space
  • Transport Cargo mass and dimensions, crew, route and destination

Checks before quotation

  • Commercial Confirm inspection, operator documents, warranty, spare parts, schedule and delivery basis
  • Technical Approve chassis, crane model, load chart, outriggers, subframe, body drawing and completed axle loads

RFQ requirements

  • Required Destination; quantity; lifted load and radius; lift height; ground conditions; cargo requirement; compliance and delivery terms.
Chat on WhatsApp

Project inquiry

Product Specifications View full specificationsHide specifications

Chassis and power

Manufacturer
Sinotruk HOWO / Chengli configuration
Vehicle model
HOWO 8×4 14 t Boom Truck
Chassis brand
HOWO
Drive layout
8×4
Fuel type
Diesel
Engine model
MC11.40-60
Engine power (kW)
297
Transmission
12-speed
Wheelbase
2,100 + 4,300 + 1,350 mm

Dimensions and weight

Gross vehicle weight (kg)
31000
Curb weight (kg)
21300
Rated payload (kg)
9505
Overall length (mm)
12000
Overall width (mm)
2550
Overall height (mm)
3990

Crane and lifting equipment

Crane model
SQS350-5
Boom
Five-section straight boom
Maximum lifting height
21.3 m
Maximum reach / radius
19.9 m
Maximum lifting moment
350 kN·m

Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.

WhatsApp