Water Bowsers & Dust Control Trucks

CL5160 4×2 Water Sprinkler Truck

A 4×2 water-truck configuration with a 10 m³ effective tank. Select spray outlets and the pump around the area to be wetted, working speed and refill cycle; operational fill also depends on the completed vehicle.

CL5160 4×2 Water Sprinkler Truck
Primary use: Worksite road wetting and water distribution

Where this configuration fits—and where it does not.

Suitable working conditions

  • Application Road washing, water spraying or dust-control work defined by the selected tank and spray package

Unsuitable working conditions

  • Limits Operation outside the approved load, route, stability, equipment or destination compliance limits.

Configuration options and trade-offs

  • Duty Cycle Higher output or capacity targets can increase chassis, power, cooling and site-control requirements.
  • Mass And Equipment Additional body, tank, crane, deck or safety equipment adds tare mass and changes axle distribution.

Compliance documents

  • Required Completed-vehicle drawing, mass and axle sheet, equipment specification and destination document matrix.
Set working water volume from completed-vehicle mass, axle limits, route, water source and required spray pattern.
Registration, emissions, dimensions, axle loads, operator requirements and equipment rules depend on destination and the final completed-vehicle specification.

Vehicle gallery

Vehicle photos and details.

Commercial confirmation

Price and delivery

Price, delivery and shipping

Reference priceUSD 37,000–48,000

Reference price, not an FOB or CIF quotation.

Supplier, inspection and support

Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.

Define dimensional, functional, safety-system, leakage, labeling and document checks before shipment.

Confirm manuals, consumables, spare parts, service responsibilities and warranty scope for the ordered configuration.

Product questions

What should be confirmed before this truck is configured?

Confirm the final chassis, effective tank volume, spray equipment, completed-vehicle mass and destination requirements in one approved specification.

What information is needed for a technical quotation?

Water source; route length; spray width and flow; dust conditions; refill cycle; destination rules.

Are destination approvals included?

No approval is assumed. Confirm the destination document matrix, registration route and equipment requirements before contract.

Project inquiry

Request a model-specific review.

Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.

Buyer inputs required

  • Delivery Destination, quantity, drive side, emission requirement, inspection and delivery basis.
  • Operating Brief Water source; route length; spray width and flow; dust conditions; refill cycle; destination rules.

Checks before quotation

  • Commercial Confirm inspection, warranty, spare parts, production schedule and delivery basis in writing.
  • Technical Approve the chassis record, equipment drawing, completed mass and axle sheet, operating limits and document matrix.

RFQ requirements

  • Required Water source; route length; spray width and flow; dust conditions; refill cycle; destination rules. Also provide destination, quantity and delivery terms.
Chat on WhatsApp

Project inquiry

Product Specifications View full specificationsHide specifications

Chassis and power

Vehicle model
CL5160
Drive layout
4×2
Fuel type
Diesel
Emission standard
Euro2/3/4/5/6
Transmission
Manual

Dimensions and weight

Gross vehicle weight (kg)
16000

Water and dust-control equipment

Spray reach
>16m

Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.

WhatsApp