Suitable working conditions
- Application Road washing, water spraying or dust-control work defined by the selected tank and spray package
Water Bowsers & Dust Control Trucks
14 m³ 6×4 Dust Suppression Truck
A three-axle water-truck configuration with a 14.00 m³ effective tank. Review the water demand, refill location and outlet arrangement before choosing the working fill and operating schedule.
Primary use: Worksite dust control and road wetting
Where this configuration fits—and where it does not.
Unsuitable working conditions
- Limits Operation outside the approved load, route, stability, equipment or destination compliance limits.
Configuration options and trade-offs
- Duty Cycle Higher output or capacity targets can increase chassis, power, cooling and site-control requirements.
- Mass And Equipment Additional body, tank, crane, deck or safety equipment adds tare mass and changes axle distribution.
Compliance documents
- Required Completed-vehicle drawing, mass and axle sheet, equipment specification and destination document matrix.
Set working water volume from completed-vehicle mass, axle limits, route, water source and required spray pattern.
Registration, emissions, dimensions, axle loads, operator requirements and equipment rules depend on destination and the final completed-vehicle specification.
Vehicle gallery
Vehicle photos and details.
Commercial confirmation
Price and delivery
Price, delivery and shipping
Request a configuration-specific quotation for the approved chassis, mounted equipment, inspection scope and delivery basis.
Supplier, inspection and support
Manufacturer and seller authorization remain subject to written confirmation for the ordered vehicle.
Define dimensional, functional, safety-system, leakage, labeling and document checks before shipment.
Confirm manuals, consumables, spare parts, service responsibilities and warranty scope for the ordered configuration.
Product questions
What should be confirmed before this truck is configured?
Confirm the final chassis, spray equipment, completed-vehicle mass and destination requirements in one approved specification.
What information is needed for a technical quotation?
Water source; route length; spray width and flow; dust conditions; refill cycle; destination rules.
Are destination approvals included?
No approval is assumed. Confirm the destination document matrix, registration route and equipment requirements before contract.
Project inquiry
Request a model-specific review.
Send the destination country, load, route, terrain, work cycle, preferred chassis and required options.
Buyer inputs required
- Delivery Destination, quantity, drive side, emission requirement, inspection and delivery basis.
- Operating Brief Water source; route length; spray width and flow; dust conditions; refill cycle; destination rules.
Checks before quotation
- Commercial Confirm inspection, warranty, spare parts, production schedule and delivery basis in writing.
- Technical Approve the chassis record, equipment drawing, completed mass and axle sheet, operating limits and document matrix.
RFQ requirements
- Required Water source; route length; spray width and flow; dust conditions; refill cycle; destination rules. Also provide destination, quantity and delivery terms.
Product Specifications View full specificationsHide specifications
Chassis and power
- Drive layout
- 6×4
- Fuel type
- Diesel
- Emission standard
- Euro 2/3/4/5/6
- Transmission
- Manual
Water and dust-control equipment
- Spray reach
- ＞16m
Reference values describe the reviewed configuration. Confirm the final chassis, mounted equipment, completed mass and destination requirements together in the written specification.
Buying guides
How to Choose a Water Bowser Truck: Capacity, Pump and Spray
Use three real project situations to compare water bowser tank size, refill reliability and spray coverage, then examine specific vehicle configurations.